| Characteristics | |
|---|---|
|
|
|
|
The hardness tester CSV-100 / CSV-300 is a sturdy and reliable Vickers hardness tester with controlled load application. The load application by Closed-Loop-System allows contract measurement without manual changing of the test force. The CLV-300 is perfectly applicable in quality control as well as in metallography and convinces by its versatility and usability. In the machine frame integrated you will find a LED-lighting system, a CCD-camera and a powerful PC with Windows 10. A Full-HD touch screen is connected. The securely installed optical components LED-lighting and high definition CCD-camera with 3-fold zoom build together with the motoric turret head with 2 objectives and one indenter a function unit that especially with regard to picture quality and total magnification allows standardized measurements with few objectives. Besides a manual measurement of the indentation there is also an integrated fully automatic picture evaluation of the measured indentation available. In combination with the fully automatic brightness control external influences caused by the user will be reduced to a minimum. The new software HmeWin-Touch with its clear user interface allows a quick and user-friendly handling and data entry. |
Downoad Data sheet
|
|
The hardness tester CSV-100 / CSV-300 is a sturdy and reliable Vickers hardness tester with controlled load application. The load application by Closed-Loop-System allows contract measurement without manual changing of the test force. The CLV-300 is perfectly applicable in quality control as well as in metallography and convinces by its versatility and usability. In the machine frame integrated you will find a LED-lighting system, a CCD-camera and a powerful PC with Windows 10. A Full-HD touch screen is connected. The securely installed optical components LED-lighting and high definition CCD-camera with 3-fold zoom build together with the motoric turret head with 2 objectives and one indenter a function unit that especially with regard to picture quality and total magnification allows standardized measurements with few objectives. Besides a manual measurement of the indentation there is also an integrated fully automatic picture evaluation of the measured indentation available. In combination with the fully automatic brightness control external influences caused by the user will be reduced to a minimum. The new software HmeWin-Touch with its clear user interface allows a quick and user-friendly handling and data entry. |
| Options | ||||||
|---|---|---|---|---|---|---|
| Options |  |
Autofocus by motoric Z-axis |  |
Semi-automatic CHD-measuring by manual XY-table with digital micrometer: Travel path 25 x 25 mm Alternative: Fully automatic CHD-measuring with motoric XY-table: Travel path 150 x 100 mm |
 |
With the scan function (optional) the user can determine to take a high definition picture of the complete sample or just one part of it and display it as an overview image. (only CSV-100AM / CSV-300AM) |
| Models CSV-100 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hardness scale | Vickers HV according to DIN EN ISO 6507, ASTM E92 |
HV0,1 - HV0,2 - HV0,3 - HV0,5 - HV1 - HV2 - HV3 - HV5 - HV10 | Hardness conversion | Conversion according to DIN EN ISO 18265 | ||||||||
| Testing forces | Testing forces [N] | 0,09807N - 0,2452N - 0,4903N - 0,9807N - 1,961N - 2,942N - 4,903N - 9,807N | Accuracy | According to DIN EN ISO und ASTM | Increase time | From 5 - 99s with 1s subdivision according to DIN EN ISO and ASTM |
Contact velocity | According to DIN EN ISO und ASTM | Test force application | Closed Loop System | Test force selection | Adjustable via software |
| Testing height | 185mm | 162mm | Depending on test table | 150mm | ||||||||
| Spindle stroke | 95mm | |||||||||||
| Turret | Motorized 3-fold turret (1 indenter, 2 objectives) |
✔ | ✔ | ✔ | ✔ | |||||||
| Optics | Objectives | Standard lenses 10x and 40x (optional 5x and 20x) |
Image capturing | Integrated CCD camera (6,4MP, 420MB/s, USB3.1) |
Zoom levels | 3 | ||||||
| Illumination | Built-in LED illumination | ✔ | ✔ | ✔ | ✔ | Fully automatic brightness control |
✔ | ✔ | ✔ | ✔ | ||
| Spindle | Z-Axis | Manual | Manual | Motoric | Motoric | Autofocus AF | ✖ | ✖ | ✔ | ✔ | ||
| EHT (CHD) | Fully automatic testing and image evaluation |
✖ | ✖ | ✖ | ? 100x150mm | |||||||
| Hardware | PC | Built-in Windows PC, Control communication via CAN-Bus | Interfaces | 4 x USB3.1, 1 x Displayport, 1 x Gigabit LAN (RJ45) |
Monitor | External 21,5“ Full HD Capacitive 10-point Multi-Touch Monitor | ||||||
| Software | Operating system | Windows 10 Professional 64bit | Hardness testing software | HmeWin-Touch | ||||||||
| General data | Dimensions (width x depth x height) |
267 x 580 x 625mm | Weight | 65kg | Electrical connection | 100-230V, 50-60Hz | ||||||
| ✔ = Standard equipment ✖ = Not available |
||||||||||||
| Models CSV-300 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hardness scale | Vickers HV according to DIN EN ISO 6507, ASTM E92 |
HV0,3 - HV0,5 - HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30 | Hardness conversion | Conversion according to DIN EN ISO 18265 | ||||||||
| Testing forces | Testing forces [N] | 0,2942N - 0,4903N - 9,807N - 19,61N - 29,42N - 49,03N - 98,07N - 196,1N - 294,2N | Accuracy | According to DIN EN ISO und ASTM | Increase time | From 5 - 99s with 1s subdivision according to DIN EN ISO and ASTM |
Contact velocity | According to DIN EN ISO und ASTM | Test force application | Closed Loop System | Test force selection | Adjustable via software |
| Testing height | 185mm | 162mm | Depending on test table | 150mm | ||||||||
| Spindle stroke | 95mm | |||||||||||
| Turret | Motorized 3-fold turret (1 indenter, 2 objectives) |
✔ | ✔ | ✔ | ✔ | |||||||
| Optics | Objectives | Standard lenses 10x and 40x (optional 5x and 20x) |
Image capturing | Integrated CCD camera (6,4MP, 420MB/s, USB3.1) |
Zoom levels | 3 | ||||||
| Illumination | Built-in LED illumination | ✔ | ✔ | ✔ | ✔ | Fully automatic brightness control |
✔ | ✔ | ✔ | ✔ | ||
| Spindle | Z-Axis | Manual | Manual | Motoric | Motoric | Autofocus AF | ✖ | ✖ | ✔ | ✔ | ||
| EHT (CHD) | Fully automatic testing and image evaluation |
✖ | ✖ | ✖ | ? 100x150mm | |||||||
| Hardware | PC | Built-in Windows PC, Control communication via CAN-Bus | Interfaces | 4 x USB3.1, 1 x Displayport, 1 x Gigabit LAN (RJ45) |
Monitor | External 21,5“ Full HD Capacitive 10-point Multi-Touch Monitor | ||||||
| Software | Operating system | Windows 10 Professional 64bit | Hardness testing software | HmeWin-Touch | ||||||||
| General data | Dimensions (width x depth x height) |
267 x 580 x 625mm | Weight | 65kg | Electrical connection | 100-230V, 50-60Hz | ||||||
| ✔ = Standard equipment ✖ = Not available |
||||||||||||
| Accessories |  |
Hardness reference blocks with DAkkS calibration certficate |
All hardness reference blocks are calibrated according to DIN EN ISO 6507-3 and/or ASTM E92 by an accredited calibration laboratory and are delivered with DAkkS calibration certificate. Hardness range from 80 - 1500 HV, depending on Vickers test scales. |  |
Indenters Vickers / Knoop with DAkkS calibration certificate |
All indenters are calibrated according to DIN EN ISO 6507-2 and/or ASTM E92 and are delivered with DAkkS calibration certificate. |  |
Specimen holder for mounted samples | Specimen holders are available in 3 different types (1-, 4-, or 6-fold) for different diameters. |  |
High-quality objectives 40-fold / 10-fold (standard) |
Achromatic incident light objectives together with high definition CCD-camera for standard-compliant illustration. |  |
High-quality objectives 20-fold / 5-fold (optional) |
Achromatic incident light objectives together with high definition CCD-camera for standard-compliant illustration. |  |
Holder for test specimens | In addition to stand holders, we also offer customer-specific holders for test specimens. |  |
Cross table 100x100mm | Manual XY-table to position specimens. The XY-table has a travel path of 25 x 25 mm. |  |
Micrometer gauge for cross table 100x100mm |
Digital X-axis allows semi-automatic CHD-measuring. The cross table has a travel path of 25 x 25 mm. |  |
Motoric X-Y-table | Motoric XY-table to facilitate specimen holders with integrated X-Y-motors for fully automatic CHD-, SHD- and NHD-measurement. The cross table has a travel path of 150 x 100 mm. |
